Skip to content
AFArcFort Weld
Menu

Product Category

MIG/MAG Torch Parts

Contact tips, gas nozzles, diffusers, liners and torch consumables for MIG/MAG welding applications.

View ProductsBuild Product RFQ

Product Range

MIG/MAG Parts available for inquiry.

Published products show current sourcing references. Dimensions and compatibility should be checked against the requested model, drawing or sample before quotation.

Request Category Quote

Category Sourcing Overview

Define the product before confirming supply.

ArcFort Weld organizes MIG/MAG torch parts for distributors, importers, OEM buyers and repair workshops that need repeatable product references for purchasing. Buyers can review the 15AK, 24KD/25AK, 36KD/40KD, 501D/602 and ORK company-catalog reference groups, then build an RFQ by torch model, front-end stack, wire diameter, visible part reference and quantity. Catalog series help organize the request but do not replace compatibility confirmation by label, drawing, approved sample or complete component stack.

What to include in your inquiry

  1. 01Product name, model, drawing or reference part
  2. 02Size, thread, material, quantity and packaging requirement
  3. 03Destination country, delivery target and OEM request

Automated Welding Supply

Source robotic MIG/MAG torch front ends with the evidence needed for replacement review.

Automated welding cells add interface, torch-position, cooling and cable requirements beyond the loose front-end consumables used in manual torch maintenance. Use the product path for quotation scope and the guide path to prepare the installed-system evidence.

Robotic MIG/MAG Supply

Robotic MIG/MAG Welding Torch Front End

Review the catalog-supported torch neck and front-end family, then confirm the installed interface, cooling, cable arrangement and consumable stack before quotation.

Review ProductReplacement Guide

Robotic MIG/MAG Torch Replacement Evidence

Prepare the installed cell reference, torch label, interface drawing, neck geometry, connector photos and trial quantity for a controlled replacement review.

Read Buyer Guide

Parts & Selection

Identify the assembly before confirming fit.

Similar-looking parts can use different dimensions, threads or assembly relationships. Use the product family as a sourcing reference, then confirm the exact item from evidence.

01

Contact Tip

Guides the welding wire through the torch front end and transfers welding current to the wire.

Buyer check: Confirm wire diameter, thread, overall geometry, material reference and the tip holder used in the assembly.

02

Tip Holder

Positions the contact tip and connects it to the compatible torch front-end assembly.

Buyer check: Confirm contact-tip thread, torch family, holder profile, gas openings and the adjacent diffuser or insulator.

03

Gas Diffuser

Distributes shielding gas within a compatible MIG/MAG torch front end.

Buyer check: Show the gas openings, connection, seating surfaces and matching nozzle, tip holder and insulator arrangement.

04

Gas Nozzle

Directs shielding gas around the wire and weld area while protecting the inner front-end parts.

Buyer check: Confirm nozzle profile, opening, length, attachment style, torch family and contact-tip position when documented.

05

Torch Liner

Supports welding-wire feeding through the torch cable toward the contact tip.

Buyer check: Confirm wire type and diameter, torch cable length, liner construction, connector end and finished length.

06

Swan Neck

Connects the torch body to the front-end consumables and establishes the working angle.

Buyer check: Confirm torch family, neck geometry, connection at both ends, cooling arrangement and complete front-end stack.

07

Torch Switch

Provides the torch-handle control input used with a compatible welding power source.

Buyer check: Send the torch model, switch profile, mounting method, lead arrangement and clear photos of the connection.

Company Catalog Reference: Product Families (9)

These company-catalog family names help organize an inquiry. They are not universal-fit claims; confirm the torch label, part reference, sample, drawing or approved component stack.

15AK catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Swan neck, Torch liner, Insulator or holder spring, Air-valve arrangement

The company catalog shows more than one 15AK torch arrangement. Send the complete torch and label, keep the nozzle-to-neck parts in removal order, and record only measured or visibly marked wire size, thread and length references before requesting a match.

24KD catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner

Treat 24KD as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the air-cooled arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

25AK catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Swan neck, Torch liner

Treat 25AK as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the air-cooled arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

36KD catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner

Treat 36KD as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the documented torch arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

40KD catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner

Treat 40KD as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the documented torch arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

501D catalog reference group

Complete water-cooled torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner, Water and cable connections, Insulator

Treat 501D as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the water-cooled connection layout, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

ORK 200A catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Swan neck, Torch liner

Treat ORK 200A as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the air-cooled arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

ORK 350A catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner, Insulator

Treat ORK 350A as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the air-cooled arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

ORK 500A catalog reference group

Complete torch, Gas nozzle, Contact tip, Tip holder, Gas diffuser, Swan neck, Torch liner, Insulator

Treat ORK 500A as a company-catalog sourcing reference, not proof that every similarly named part fits. Confirm the exact torch label, the air-cooled arrangement, contact-tip marking, nozzle profile, complete front-end stack, liner ends and rear connections. Provide a drawing, approved sample or clear photographs before final product matching.

Open company catalog

RFQ Builder

Prepare a MIG/MAG torch parts inquiry

Selections organize the RFQ; they do not confirm fit.

Leave unknown when the label is missing, then attach the complete torch and its connections.

Similar series names can still use different front-end stacks, cooling paths or rear connections.

Parts needed

Evidence for compatibility review

Attach the complete torch and model label first. Then show the nozzle, diffuser or holder, contact tip and insulator in removal order, plus liner ends and rear connections when included.

Selection variables

Torch model and front-end family
Parts with similar trade names may use different connections, lengths and assembly relationships.
Confirm with: Torch label, existing parts list, assembled photo, approved sample or drawing.
Welding wire diameter
The documented wire size affects contact-tip selection and the required liner range.
Confirm with: Wire package, approved welding procedure, existing tip marking or purchasing record.
Thread and component geometry
A thread reference alone does not confirm length, seat, outside profile or gas-path alignment.
Confirm with: Drawing, measured approved sample, reference number or scale photographs.
Nozzle, diffuser and tip-holder stack
The surrounding components must connect correctly and preserve the intended shielding-gas path.
Confirm with: Disassembled parts kept in order, plus photos of connections and the assembled front end.
Cable, liner and control details
Complete torch and repair-part inquiries may depend on cable length, liner termination and switch connection.
Confirm with: Complete-torch photo, cable reference, connector views and documented length requirement.

Compatibility evidence

  1. 01Record the torch model and photograph the assembled front end before removing parts.
  2. 02Lay out the nozzle, diffuser or holder, contact tip and insulator in installation order.
  3. 03Record only verified wire sizes, threads, lengths, markings and reference numbers.
  4. 04Photograph liner ends, cable connections and torch switches separately when they are part of the request.
  5. 05Approve the complete matched assembly or sample reference before repeat purchasing.
Read identification guide

Buyer Guide

How to choose MIG/MAG Parts.

Use these checks to prepare a sourcing request. Confirmed drawings, samples and approved references remain the basis for final product matching.

  1. 01

    Confirm the torch model, thread, diameter and material before ordering contact tips or gas nozzles.

  2. 02

    Send existing part numbers, drawings or reference parts when compatible brand information is required.

  3. 03

    For distributor programs, group fast-moving consumables by torch series and packaging requirement.

Product range

  • MIG/MAG contact tips by thread and wire size
  • Gas nozzles, tip holders, diffusers and torch liners
  • Company-catalog torch-series consumables and replacement part lists
  • OEM packaging and mixed distributor RFQ programs

Specifications to confirm

  • Thread type such as M6 or other sizes confirmed by reference part or drawing
  • Wire size, tip length, material grade and package quantity confirmed before quotation
  • Compatible torch model or reference number required for accurate matching
  • Private label packaging and carton design available after order details are confirmed

Compatibility, packing & OEM

MIG/MAG torch parts are available in different sizes and fit requirements. Compatibility can be confirmed by sample, drawing, torch model, model number or existing reference part before quotation. ArcFort Weld does not claim exact brand compatibility unless the buyer provides confirmed references.

Standard export packing or customized packaging can be discussed by product type and order quantity. Small trial orders are accepted for standard products, while OEM packaging MOQ depends on the item and packaging requirement.

OEM packaging is available for MIG/MAG torch parts, including logo label discussion, private label bag or box packing and carton design after product details, artwork and quantity are confirmed.

Review OEM service

Supply considerations

  • Suitable for distributor product lines
  • Structured category references for repeat sourcing
  • Supports OEM and private label discussion

Applications

Industrial sourcing scenarios.

Product families support distributor programs, repeat maintenance purchasing and industrial welding or cutting requirements.

Metal fabrication workshops

Automotive repair and body shop welding

Industrial maintenance and distributor replacement programs

Construction and general MIG/MAG welding supply

Related application pages

Shipbuilding Welding Parts Automotive Welding Consumables Metal Fabrication Welding Parts

FAQ

Can ArcFort Weld quote MIG/MAG torch parts by reference part or drawing?

Yes. Buyers can send reference parts, drawings, product lists or reference numbers so the technical details can be confirmed before quotation.

Are compatible brands listed on every MIG/MAG part page?

Compatibility data is added only after it is confirmed by torch model, reference number, drawing or reference part.

Can MIG/MAG torch parts be supplied with OEM packaging?

Yes. OEM packaging is available after product details, quantity, label artwork and carton requirements are confirmed.

What are the main parts of a MIG/MAG welding torch?

Common replacement items include the contact tip, tip holder or gas diffuser, gas nozzle, torch liner, swan neck and torch switch. The exact assembly varies by torch system and should be confirmed from a model, drawing or sample.

Does selecting a catalog series confirm MIG/MAG torch compatibility?

No. A catalog series organizes the inquiry only. Final compatibility should be reviewed from the exact torch label, complete front-end stack, visible part reference, drawing, approved sample and connection details.

Request for Quotation

Need MIG/MAG Parts?

Send your product list, drawings, product photos or reference part details. ArcFort Weld will respond with quotation, MOQ and delivery options after confirmation.

Request a Quote
arcfortweld@outlook.comWhatsApp +86-18803076512